|
ER-2 (U2) Recon Plane
1/9 Scale with a 12 ft. wingspan
|
Single Engine Setup using OS .91 VRDF
|
Available Fall 2002
|
Commonly known as the U-2
|
 |
 |
N.A.S.A.s ER-2 in flight
N.A.S.A.s ER-2 on Ramp
Specifications:
 Scale: 1/9 th
 Wing Span: 12.5"
 Fuselage length:
 Wing Area
 Typical Weight
 Recommended Engine OS VRDF .91
 Specifications are subject changes
Kit Features:
 Fiberglass Reinforced Epoxy (West System) composite construction on the Fuselage
 Pre-cut high density (blue) wing and tail cores
 Balsa wing and tail surfaces sheeting
 Pre-cut plywood formers, reinforcements, etc.
 Pre-cut and formed aluminum wing attach fittings and back up plates.
 Molded Epoxy fiberglass Air intakes, Internal ducting, Landing Gear fairings, and Wing Tips
 Vacuum formed Clear Plastic Canopy
 Illustrated Construction Manual
Recommended Optional Equipment:
 Ramtec Ducted Fan Unit. See: Trim Air/Ramtec
 Century Jet Models Retracts (Ask for Laurmar Enterprises EP-2, 1/9 scale gear). We will eventually get a Part Number assigned. We can also furnish these gear direct from us.
 6 Channel (If you want Retracts and Flaps)
 We recommend FMA products. FMA Link
 Pre-primed topcoat.
Prices:
 Basic Kit $795.00
 Engine: Inquire for current Prices
 Ramtec Ducted Fan Unit : $135.00
 Pre-prime topcoat $ 25.00
 Retracts and air support package $255.00
|